• Kerf = 4.0mm
• Body = 3.2mm
• Tooth angle = 5 deg positive
• Tooth spacing = 16mm

A relatively coarse tooth blade with positive rake angle (teeth lean slightly forwards) and triple chip grinding suitable for aluminium and other non-ferrous metals. Also suitable for hard plastics. Tooth pitch of 16mm suitable for thick wall sections 6mm+ and solids up to 100mm. These blades are ideal for saw benches, table and panel saws where the blade spindle is below the work piece.  If the blade spindle is above or to the side of the work piece choose the alternative negative rake angle (search under Swedex code N2EAM16) for radial arm, mitre saws and chop saws.

30-32